A toilet that overflows repeatedly is usually reporting a problem that isn't in the toilet at all.
Before diagnosing anything, turn the shutoff valve on the wall behind the toilet clockwise until it stops. If the valve is stuck or missing, lift the tank lid and push the flapper down by hand to seal the tank outlet — that stops water leaving the tank while you deal with the valve. Don't flush again to "see if it clears." A second flush on a blocked line is how a minor overflow becomes a flooded bathroom floor.
Plunging often moves a blockage far enough to restore flow without actually removing it. The toilet works again, so it seems solved — but the obstruction is still sitting in the trap or the branch drain, catching everything that passes. Each flush adds a bit more until it blocks again. This is the most common reason a toilet overflows, seems fine for a week, then overflows again.
If the toilet is the lowest or most-used fixture on its branch, it's the first place a developing main-line blockage shows itself. The telltale signs that the problem is downstream rather than in the toilet:
Any of those means the blockage is in shared piping. Plunging the toilet won't help, because the toilet isn't the problem — see why a basement drain backs up for the related version of this.
Brockton has plenty of mature trees and plenty of older sewer laterals with joints roots can enter. A root mass behaves like a strainer: water passes, solids don't. The result is a line that works acceptably for ordinary use but clogs repeatedly under normal household load, with the toilet showing it first. This produces the classic pattern of a toilet that gets cleared, behaves for a few weeks, then blocks again — because nothing removed the roots.
Your drain system needs air to work. The vent stack going through your roof lets air in behind draining water. If it's blocked by a bird's nest, leaves, or ice during a New England cold snap, the drain can't pull air and flow becomes slow and erratic. A gurgling toilet with no visible clog, especially one that started after a storm or a hard freeze, is a classic blocked-vent symptom.
Two versions of this. Some early low-flow toilets simply don't move enough water to carry waste through a long horizontal run, and they clog chronically no matter how clear the line is. Separately, a cracked or displaced toilet flange, or a partially collapsed wax seal, can restrict the outlet. If one toilet in the house clogs constantly and the others never do, and the drain line tests clear, the fixture is the suspect.
Call when more than one fixture is affected, when the same toilet clogs repeatedly after being cleared, when sewage or dark water comes up rather than clean tank water, or when you've plunged twice with no lasting result. Those all point past the fixture and into the drain line, where an auger and a proper clearing are what actually ends the cycle. Our overflowing toilet repair page covers what that visit involves.
Real human, real truck if you need one.